A 7-segment display is a LED-LCD display with 8 LCD cells are controlled by 8 pins. Usually a 7-segment display has 10 pins, 2 are common pins and the rest 8 control each LCD cell. Now, a 7-segment display is of 2 types, common cathodic and common anodic display. While the common cathodic display has its common pins hooked up to the ground(GND), the common anodic display has its common pins hooked up to high voltage(+5). A diagram explaining this is given. I have used a display numbered LT542 which is a common anodic display. This project is aimed to control the LT542 to display each number from 0 to 9 at a second's gap. MATERIALS REQUIRED: Arduino Uno LT542 Jumper wires (male-to-male) Breadboard STEPS: Wire the setup as shown in the schematic and pictures. Copy the code given and paste it into the arduino IDE. Plug in your board tho the computer using a USB cable. Upload the code. CODE: /** PINOUT DIAGRAM FOR THIS CODE ...
